Focus Drip Tip Le detail qui change la vape
The focus

Zeus Sub Ohm Tank, what its 810 drip tip does to the draw

Written by Julien Marchand · · 8 min. read

Zeus Sub Ohm Tank, what its 810 drip tip does to the draw
Picture: Usman Yousaf / Unsplash

Geekvape’s Zeus Sub Ohm Tank sells mostly on its clouds and its mesh coils. Shop listings line up ohms, watts and millilitres, then give the part that meets your lips three characters, the number “810”. Yet the Zeus Sub Ohm Tank now comes in three generations, all with an airflow sitting at the top, right under the mouthpiece. Before fitting a coloured tip or a taller one, it pays to know what that small number commits you to.

Zeus Sub Ohm Tank, one 810 drip tip across three generations

Geekvape’s three official product pages give the same answer. The original tank from 2020, the Z Sub-ohm SE from 2022 and the Z Sub-ohm Tank 5, which the brand listed in December 2025, all take an 810 drip tip, and the Tank 5 page calls it “replaceable”. A standard 810 tip therefore fits every one of them.

The box contents published by Geekvape supply the other half of the answer. None of the three boxes includes an 810 to 510 adapter or a second mouthpiece. The Zeus Sub Ohm Tank leaves the box with a single wide tip, and moving to a narrow one means buying a separate part.

Three Zeus tanks, one drip tip well

The name now covers three tanks that retailers often mix up. Their size and their coils change from one generation to the next, while the well that holds the mouthpiece stays the same. The table follows the manufacturer’s pages.

GenerationGeekvape pageWidth and heightDrip tipPre-installed coil
Original Zeus Sub-ohmOctober 202026 x 42.5 mm without tip810Mesh Z2 0.2 ohm, 70 to 80 W
Z Sub-ohm SEAugust 202229 x 51.9 mm810Z 0.15 ohm XM, 70 to 85 W
Z Sub-ohm Tank 5December 202529 x 56.1 mm810, replaceableZ 0.2 ohm XM, 70 to 80 W

Standard capacities run from 5 to 5.5 ml, with a 7 ml glass for the Tank 5. UK rules cap refillable tanks at 2 ml, and each generation has a 2 ml TPD version according to its page. That is the version sold in the UK.

The stock tip on the Zeus tank, and what the listings leave out

The format is the only detail published about the mouthpiece. Material, height and internal bore appear neither on Geekvape’s pages nor on the top-ranking listings checked for this article. That silence has practical consequences.

A material nobody names

No page states what the supplied tip is made of. One retailer listing mentions Delrin, but as a customisation option, not as the stock material. Without a source, the safe course is to assume nothing and judge the tip in use, especially by the heat it passes to your lips on a coil running at 70 W or more.

A format that sets the base, not the bore

The 810 figure describes the base of the tip, around 12.5 mm, not the width of the inner channel. Our guide to 510 vs 810 drip tip sizes covers both standards. Two 810 tips can therefore give different draws on the same Zeus, depending on their bore and their height.

Air from the top cap to your lips

On this tank, air comes in at the top, travels down to the coil and then back up to the mouthpiece. The 2020 page describes a “direct top airflow” paired with a “top-to-bottom airflow”, and the SE and Tank 5 pages list an adjustable ring at the top. The air inlets stay above the e-liquid, which is meant to limit leaks.

That path brings the vents close to your mouth. The ring turns at the top, right beside the tip, and a heavily flared tip can get in the way of your fingers without changing how the system works. Before buying a wide, flared model, check that it leaves the ring easy to reach.

The vapour itself comes off a mesh coil rated anywhere from 50 to 85 W depending on the head. A short metal tip passes on more of that heat than a taller one in an insulating material, which our heat-resistant drip tip guide explains in detail.

Swapping the mouthpiece on a Zeus Sub Ohm Tank

Replacing the stock tip is the simplest way to adjust comfort without touching any settings. There are two routes, depending on whether the draw stays airy or gets tighter. Either way, the O-ring in the well decides how firmly the tip sits.

Another 810 tip

An 810 drip tip fits all three generations of the Zeus Sub Ohm Tank with no adapter. The choice then comes down to material and height. Resin, Ultem, Delrin and stainless steel react differently to the heat of a sub-ohm coil, as our comparison of drip tip materials shows.

A 510 tip with an adapter

For a narrower channel, you need an 810 to 510 adapter, which none of the three official boxes contains. An adapter tightens the airflow through the tip, which suits a restricted direct lung draw. It does not turn the Zeus into a mouth to lung tank, since Z coils are built for high-power direct lung vaping.

Filling and changing coils without touching the tip

Geekvape put the fill port at the top and the coil change at the base. The Z coil page states that the heads push in through the threaded base of the tank. The mouthpiece is never an access hatch, so it can stay in place through every refill and coil change.

On the Tank 5, the manufacturer’s guide describes an attached cap that you slide in the direction of the arrow to open the fill hole, taking care not to overfill. With a new coil, it then advises waiting 3 to 5 minutes for the cotton to soak through. Glass and coil are both changed with the tank upside down and the base unscrewed.

Taking the tip off is then only needed for cleaning. Condensation that builds up in the channel of a wide tip washes out in warm soapy water, following the method in our guide on how to clean a drip tip, O-ring included.

FAQ

The questions below come up often in searches about this tank, beyond its mouthpiece.

Which Z coil suits the Zeus Sub Ohm Tank?

It depends on the power your mod delivers and the draw you want. Geekvape’s Z coil guide rates the 0.4 ohm at 50 to 60 W and the 0.2 ohm at 70 to 80 W, while the 0.15 ohm XM runs from 70 to 85 W. The 0.4 ohm is the least demanding, the 0.15 ohm the hungriest for both power and e-liquid.

How long does a Zeus coil last?

Geekvape measures it in millilitres of e-liquid rather than days. The brand puts the older Z series at around 30 ml per coil, and quotes up to 60 ml for the Z XM Boost heads. A very sweet e-liquid usually wears the wick faster than those figures suggest.

Can you use 50/50 in a Zeus sub ohm tank?

Retailer listings recommend an e-liquid with at least 70% vegetable glycerine. A published review also notes the large wicking ports on Z coils, which a thinner 50/50 passes through faster, with a risk of flooding the coil and making the tank spit.

Is the 0.4 ohm coil always rated the same?

No. The 2020 tank page rates the Mesh Z1 0.4 ohm at 60 to 70 W, while the current Z coil page from the same brand puts it at 50 to 60 W. Starting at the lower range is the cautious approach.

How long can e-liquid stay in the tank?

The Tank 5 guide advises changing the coil when e-liquid has sat in the tank for more than two weeks and its colour has darkened, a sign of oxidation. Filling with less at a time avoids that situation.

Zeus Sub Ohm Tank, a mouthpiece that is easy to replace

So this tank can be read from the top down as well. An 810 format shared by all three generations, no adapter in the box, airflow tucked under the tip and a coil that changes from the base leave the mouthpiece free, a part you can replace without taking anything else apart.

Choosing a drip tip means setting the comfort of the whole tank at your lips. On the Zeus Sub Ohm Tank, it is the part you can change most freely, and exactly the kind of detail this magazine likes to examine up close.

Editorial content for adult readers only. Vaping products can contain nicotine, which is a highly addictive substance. Vaping products are not for sale to anyone under 18 in the UK. This article is not a buying recommendation.